0.25-3.0m/s Progressive Elevator Safety Gear For Lift
Introducing the Elevator Safety Gear, a reliable braking device
designed to enhance elevator safety. This essential component is
installed either in the elevator car or at the bottom of the
counterweight system.
The Elevator Safety Gear consists of two main parts: the pulling mechanism and the braking
mechanism. The pulling mechanism serves the purpose of transmitting
the mechanical action of the governor to the braking mechanism,
initiating its operation. Once activated, the internal wedge blocks
of the braking mechanism securely hold the elevator in place on the
guide rails, preventing any further descent.
With its robust construction and precise engineering, the Elevator
Safety Gear ensures optimal performance and dependable protection. Designed to
meet the highest safety standards, this essential device guarantees
the utmost safety for passengers and elevator operators alike.
Invest in the Elevator Safety Gear for an added layer of security in your elevator system. Trust in
its reliable functionality and professional-grade design to
safeguard against potential accidents and ensure peace of mind.
Elevator safety is paramount, and the Elevator Safety Gear is here to provide the ultimate safety solution.
| SN-SG-L06A | Rated Speed | 0.25-3.0 m/s |
| Tripping Speed | 0.29-3.83 m/s |
| Rail Width | 15.88/16 mm |
| Permitted P+Q | 2000-5500 kg |
| Rail Lubrication | Oil/Dry |
| Certifications | GB/CE |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements.
Configuration is not only for wire rope and rated load, but also
considered the size of the traction, as a result, the tensile
strength of wire rope is greater than the weight of the lift. The
safety factor is equipped with more than four wire rope. So it
won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator
running?
If it occurs, the elevator will automatically stop due to the
electrical and mechanical safety device. In case of power
failure,elevator brakes will automatically taken. In addition, the
power supply departments such as planned outage, prior notice are
also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of
elevator will automatically restart without any danger. With anti
clamping switch, once the gate touched, this switching action make
the elevator unable to be closed and even reopened. In addition,
closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the
(tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily
proportional to the operation complexity. Therefore, escalators
designed by us apply an integrated structure, so that the equipment
is more precise and more efficient and allows easier and more
convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
